Table of Contents
Advertisement
8. UNLOADING FILM
(Be sure to remove the film from the camera in the shade.)
B After you have exposed the last frame of the roll, film
rewinds automatically. Then, the motor stops, and
( uO ) flickers as shown to indicate end of rewind.
B
Open the back cover, and remove the cartridge from
the chamber by pulling on its top with your fingertip as
shown.
Notes:
• During rewinding, the exposure counter counts frame
numbers in reverse.
• A 24-exposure film roll takes about 20 seconds to be
rewound.
• The entire roll of film including the film leader is always
rewound into the cartridge to avoid leakage of light onto
any part of the film.
Advertisement
Table of Contents
