Table of Contents
Advertisement
UNLOADING FILM
1. Rewinding the film
After you have exposed the last frame of the roll,
the lens retracts and the film rewinds automaticaily.
Then, the motor stops, and (0) blinks for approx.
5 seconds to indicate that the film has been
rewound completely.
And the power will turn OFF automatically.
• If you turn the main switch ON before removing
the film, (£7) blinks and the shutter cannot be
released.
22
2. Unloading film
Open the back cover, and remove the film car¬
tridge from the chamber by pulling the top out first
with your finger.
Notes:
• Never open the back cover until the whole film
roll is rewound completely.
• A 24-exposure roll of film takes about 20 sec¬
onds to be rewound.
• The shutter may be released one or two frames
even after the specified number of frames have
been used up as indicated by the number of
shots shown on the film cartridge. If this occurs,
these extra frames may be lost in processing.
Advertisement
Table of Contents
