Unloading Film - Pentax IQZoom Operating Manual

UNLOADING FILM
2 3
1. Soon after you reach the end of the roll, the
motor is automatically activated to start
rewinding the film. While the film rewind is
taking place, the film-transport mark in the
LCD window flickers, and simultaneously
the exposure counter is automatically reset.
When the rewind is over, the motor stops and
the cartridge mark flickers.
• It takes about 35 seconds to rewind a roll of
24-exposure film.
• Never open the back cover until the motor stops.
2. Open the back cover, and remove the film
cartridge from the chamber by pulling its top
portion with your finger as shown.
3. If you wish to rewind the film in midroll, push
the auxiliary rewind button with your fingernail,
and the motor will be activated to start rewinding
the film; you can then release your fingernail
from the button. When the rewind is over, the
motor stops.
12