Download Print this page

HJC RPHA 91 Owner's Manual page 7

Advertisement

2. The chin bar is in the full open position when you hear
"click" sound.
Warning!
To maximize helmet's ability to protect, we highly recommend to ride with the chin bar in closed position.
In the event a rider rides with the chin bar open, there is an increased risk of injury to the frontal area.
Do not raise or lower the chin bar while riding. This may interrupt rider's ability to control the motorcycle
and may lead to an accident. Please use care when opening or closing the chin bar as it may scratch the
helmet. Damage caused by this is not subject to manufacturer's warranty.(*Do not disassemble.)
Closing Chin Bar
Warning!
When the shield is open and the chin bar is raised and lowered to a lock position, the shield may not
be in a latched position with the chin bar. Before riding, please make sure that the shield is latched
with the chin bar securely. (Center closure system)
Pull the chin bar downward to completely cover your face and chin. Listen for "click" sound to ensure that
the chin bar has locked into its full closed position.
11
HJC Intercom Placement Guide
Mounting the Intercom
Unscrew and remove the base cover at the back of the helmet to begin mounting process
of the intercom. Please refer to the manual of the current intercom you are using for directions
on mounting and unmounting the intercom unit.
Base Cover Detachment
1. Remove the screws from the base cover. (picture1)
2. While lifting the base cover(direction A) detach it by pushing toward direction B. (Picture 2)
Base cove
Base cove
Base cover
Base cover /
1
Screw
Screw
Screw
Bracke
Bracke
Bracket
Mounting the Base Cover
Push the base cover underneath the gasket at the bottom of the helmet until the base cover
and the bracket screw holes match. Using the screw, fixate the base cover onto the helmet.
Bluetooth UI Cover Detachment
1. Push the Bluetooth UI cover in the direction of the arrow while pressing down on A.
1
A
Mounting the Bluetooth UI Cover
1. After aligning the hook of the Bluetooth UI cover with the groove of the body, and push
and attach.
1
2
12

Advertisement

loading