Advertisement
Cheek Pad Removal
1. Remove Snap between the Cheek pad and neck roll.
2. Gently pry the cheek pad away from the interior, releasing the snaps.
3. Grasp the cheek pad near its center and gently pull it free from the chin strap.
1
Cheek Pad Installation
1. Feed the chin strap through the opening in the cheek pad.
2. Clip the cheek pad's 3 small male snaps to the 3 female snaps fixed on the shell interior.
3. Install Snap between Cheek pad and neck roll.
1
5
Neck Roll Removal
1. Remove Snap between the Cheek pad and neck roll.
2. Pull out the Neck roll to remove.
3
Neck Roll Installation
1. Assemble the neck roll plastic plate between the shell and the EPS.
2. Install Snap between Cheek pad and neck roll.
3
※Slide tab 'A' from the cheek pad into the holder 'B' .
(Repeat same on opposite side)
1
2a
1
B
B
A
A
2
6
Advertisement
