Water Drain Hose - Bosch WQG233D0NL User Manual And Installation Instructions

NLSet up and connect

4.4 Water drain hose

Condensation water is formed during
drying, which your appliance uses for
automatic cleaning. Use the water
drain hose to direct excess
condensation water directly into the
waste water.
Comments
¡Use this device with the
supplied water drain hose. When you
connect the water drain hose
→ Page 14 , you do not have to
regularly empty the condensation
tank → Page 34 . ¡You can do this
optional
→
"Accessories", page 29 order from
the service department.
Connect the water drain hose
If you do not wish to empty the
condensation tank of the device
regularly, connect the water drain
hose.
NB!
When using the device without a
properly connected condensation
water hose or water drain hose, liquid
may leak from the connection piece.
Before using the device, connect the
▶
condensation water hose or the
water drain hose properly.
Requirements
¡The device and its accessories
have been unpacked.
→ "Unpacking the device", page 12
¡The device is on the installation
place set up.
→
"Requirements regarding the
installation location", Page 13
14
Pull the condensation water hose
1.
from the connection.
The condensation water hose is connected
to the connection at the factory.
Remark:When removing the
condensation water hose, liquid
may escape from the
connection.
Slide the condensation water hose
2.
onto the holder.