Table of Contents
Advertisement
CAREFULLY
Risk of cutting!
Sharp edges on the heat exchanger
can cause cuts if touched.
Do not touch the fins of the heat
▶
exchanger.
Open the base unit
1.
→ Page 36 .
Clean the heat exchanger cover with
2.
a soft brush.
Make sure all contaminants are
removed from the seal.
Lift the center lip of the insert
3.
slightly.
Cleaning and maintenanceNL
Pull out the insert horizontally.
4.
Clean the insert under running
5.
water and dry it.
Carefully clean the fins of the heat
6.
exchanger with the brush
attachment of a vacuum cleaner.
Make sure that the slats are
extracted from top to bottom and
that they are not deformed or
damaged.
37
Advertisement
Table of Contents
