Table of Contents
Advertisement
Malfunction
Device pauses,
but the drum
turns.
Wrinkling.
and program
broken.
Cause and troubleshooting
Cooling process active.
No error - no action necessary.
▶
The loading quantity is too high.
Please note the maximum loading quantity of the
▶
→ "Programs", page 26 .
The laundry has been left in the drum for too long after drying.
Remove the laundry from the drum immediately after
1.
drying.
Spread the items out to let them cool.
2.
Unsuitable program set for the textile type.
Set the appropriate program for the textile type.
▶
→ "Programs", page 26
Easy care textiles dried too long.
→
"Change drying target", page 25 .
▶
→ "Adjust drying target", Page 25 .
▶
Anti-crease not activated.
Activate the anti-crease program.
▶
→ "Buttons", page 23
Condensation water tank filled.
→ "Empty condensation tank", page 34 .
1.
→ "Insert the condensation tank", page 35 .
2.
→ "Starting the program", Page 31 .
3.
Water drain hose is kinked or trapped.
Make sure that the water drain hose is not kinked or
1.
trapped.
Lay the water drain hose without kinks.
2.
Water drain hose is not connected correctly.
Make sure the water drain hose is connected
▶
correctly.
→
"Connecting the water drain hose", page 14
Water drain hose is clogged.
Flush the water drain hose with tap water.
▶
There is a foreign object in the bottom unit
→ "Opening the bottom unit", page 36 .
1.
Remove any foreign objects present.
2.
→ "Close bottom unit", page 38 .
3.
TroubleshootingNL
41
Advertisement
Table of Contents
