Data Verification; Dla For Toshiba - Toshiba Satellite M30X-102 User Manual

Data Verification

To verify that data is written or rewritten correctly, follow the steps below
before you write or rewrite a Data CD/DVD.
1. Click the Options button (
Options panels.
2. Select the Data in the left-side menu.
3. Mark the Verify data written to the disc after burning check box in the
Data Options.
4. Click the OK button.

DLA for TOSHIBA

Note the following limitations when you use DLA:
■
This software supports only rewritable discs (DVD+RW, DVD-RW, and
CD-RW). It does not support DVD+R, DVD-R, and CD-R discs that are
not rewritable.
■
DLA does not support both the formatting of a DVD-RAM disc and
writing to it, this function is performed by DVD-RAM Driver Software.
You may find that a format option appears when inserting a DVD-RAM
disc and then right-clicking the drive icon in Windows Explorer although
you should not use this facility. Instead use the 'DVDForm' command by
clicking the Start button on the taskbar, selecting All Programs,
DVD-RAM, DVD-RAM Driver and DVDForm.
■
Do not use any discs that have been formatted with packet writing
software other than DLA. Similarly, do not use any discs that have been
formatted with DLA with any packet writing software other than DLA.
When using a disc you are not familiar with, format it by selecting Full
Format before using it.
■
Do not use the cut-and-paste function for files and folders as the
original data will be lost if there is a write error.
■
When writing the Setup files for an application onto a disc formatted by
DLA and then attempting to start Setup from the disc, an error may
occur. In this case, you should copy the Setup files to your hard disk
and then run them from there.
User's Manual
) on the RecordNow! Console to open the
Operating Basics
4-15