Wireless Lan; Monitor; I.link (Ieee1394) - Toshiba Satellite M30X-102 User Manual

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4, Operating Basics.
Problem
Cannot access
Wireless LAN

Monitor

Refer also to Chapter 7, Optional Devices, and to your monitor's
documentation.
Problem
Monitor does not turn
on.
No display
Display error occurs.

i.LINK (IEEE1394)

Problem
i.LINK device does not
function.
User's Manual
Procedure
Make sure the computer's wireless
communication switch is set to on.
Use the ConfigFree program that comes pre-
installed on your computer to see LAN status.
If problems persist, consult your LAN
administrator.
Procedure
Make sure that the external monitor's power
switch is on. Confirm that the external monitor's
power cable is plugged into a working power
outlet.
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.
Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Procedure
Make sure the cable is securely connected to the
computer and to the device.
Make sure the device's power is turned on.
Reinstall the drivers. Open the Windows Control
Panel and double-click the Add New Hardware
icon. Follow the on-screen directions.
Restart Windows.
If problems persist, contact your dealer.
Troubleshooting
8-17