Use Of The Product - Jimmy BX7 Manual

Use of the product

Function description
Tap mode
Vacuum mode
Brushroll blockage
indicator
Vacuum+Tap+UV mode
After power on, the anti-mite vacuum cleaner starts with Vacuum +Tap +UV mode by default,
the corresponding indicator light will be on, and the machine will start vacuuming function,
brushroll tapping function, the UV light dust mite-removal function and the negative ion function.
(Figure 1)
Vacuum+Tap mode
When the machine is in Vacuum+Tap+UV Mode, press mode button once to change to
Vacuum+Tap mode. Corresponding indicator will be one and the machine will start vacuuming
function, brushroll tapping function and the negative ion function.(Figure 2)
Vacuum+UV mode
When the machine is in Vacuum+Tap Mode, press
mode button once, press mode button once to change
to Vacuum+UV mode.Corresponding indicator will be
one and the machine will start vacuuming function, the
UV light dust mite-removal function and the negative
ion function.(Figure 3)
When machine is in Vacuum+UV mode, press mode
button once, the vacuum cleaner goes back to
Vacuum+Tap+UV mode. The modes cycles in turn by
press mode button.
Dust level display
When the cleaned surface is in a clean state, the dust
level bar is blue.When it is in a dirty state, the dust level
bar is red.When it is in a slightly dirty state, the dust
level bar is yellow.
As the dust level increases,the dust level bar slowly
changes from blue to yellow,nd finally to red.As the dust
level decreases, the dust level bar slowly changes from
red to yellow until it is all blue.
4
Negative ions display
Dust level display
1
2
3
UV mode