Troubleshooting - HOMCOM 820-341V70 Instruction Manual

CLEANNING AND MAINTENANCE
1. Turn the POWER OFF.
2. Unplug the unit and let it cool completely.
3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. A mild
detergent can be used if necessary.
4. After cleaning, dry the unit with a soft cloth.
5. Wait until the unit is completely dry before use.
6. If the heater will not be used for a long time, pls take out the battery in the remote
control according to the following steps.
WARNING:
● DO NOT let liquid enter the heater.
● DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to
clean the heater. This may cause damage or deterioration to the surface of the heater.
● DO NOT immerse the heater in water.
STORAGE
1. Perform the cleaning procedures described in "Cleaning and Maintenance".
2. Wipe all parts to dry.
3. Pack the heater in a plastic bag and store it in a cool, dry place.

TROUBLESHOOTING

If the heater will not operate, please check the following:
1. Check if the power cord is plugged into an electrical outlet. If not, plug in unit to
appropriate outlet.
2. Check if electricity to the outlet is working.
3. Ensure power is turned to ON position.
4. Make sure heater is placed on a flat, solid surface.
5. See SAFETY FEATURES section for additional information.
WARNING:
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF.
DOING SO COULD CAUSE DAMAGE OR PERSONAL INJURY.
Correct Disposal of this product
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return
and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe
recycling.
7