Product Diagram; Control Panel Functions - HOMCOM 820-341V70 Instruction Manual

PRODUCT DIAGRAM

Front
INSTRUCTIONS FOR ASSEMBLY
1. Place the product on a padded surface with underside accessible.
2. Attach leg to stove by inserting tab on the top of the leg into the corresponding slat at
the bottom of the stove.
3. Insert 3 screws into predrilled holes and tighten securely.
4. Repeat with remaining three legs.

CONTROL PANEL FUNCTIONS

Control Panel
NO.
FLAME
1
2 THERMOSTAT
3 TIMER
4 MODE
Control Panel
Media Bed
Air outlet
Feet
CONTROLS
Back
FUNCTION
Turn on or off the Flame.
Set temperature indication varies from 59℉
to 90℉. Once you have chosen the desired
temperature, the heater will remain on until
the room temperature increases to the
temperature on the digital display. The
heater will cycle on and off to maintain the
desired room temperature.
Press the TIMER button more than once, the
value will vary from 0 to 12hr (1 hr interval) in
circulation.
Press the HEATER button to toggle between
the two heat settings (Low/High), or turn off
the heater.
4
Air intake
Power Switch