Gardener's Cedar Three Bin Composter Manual

Cedar Three Bin Composter

Parts List

(2) Pre-Assembled Panels with outside & in-line corners
(5) Pre-Assembled Panels without corners
(2) Pre-Assembled Front Panels with outside & in-line corners
& front door
(1) Pre-Assembled Front Panel with a front door
(3) Top Lids (center is smallest)
(1) Barrel Bolt with screws
(8) Plastic Caps
(96) .75" Screws
(2) 3.5" x 24" Boards for center bin
(8) 1.5" Screws for 2 center bin boards

Tools Required

Power Drill with Phillips Head
1. Slide 1 Pre-Assembled Panel without corners in between 2 Pre-Assembled Panels with outside & in-line corners. With the in-line
corners in the middle and the outside corners on the end. Make sure tall three pieces are flush with the corners before screwing
together.
2. Place 2 Pre-Assembled Panels without corners into the outside corners on both sides to form the ends of the composter, the
vertical wood strips should face into the composter. Make sure they are flush with the top and bottom before screwing together.
#8614028
Assembly easiest with two people
Allot 90 minutes for assembly with 2 people
8% of our profits
go back to our communities.
FoRCE-FoR-GoOD
Learn more at gardeners.com/
1-800-876-5520 • gardeners.com
info@gardeners.com
Rev 8/2023
PLEASE
RECYCLE