After Operation; After Operation Safety - Toro Workman 08303 Operator's Manual

After Operation

After Operation Safety

General Safety
•
Before you leave the operating position, do the
following:
– Park the machine on a level surface.
– Ensure that the parking brake is engaged.
– Shut off the machine and remove the key.
– Wait for all movement to stop.
•
Allow the machine to cool before adjusting,
servicing, cleaning, or storing it.
•
Do not store the machine where there is an open
flame, spark, or pilot light, such as on a water
heater or other appliance.
•
Keep all parts of the machine in good working
condition and all hardware tightened.
•
Maintain and clean the seat belt(s) as necessary.
•
Replace all worn, damaged, or missing decals.
Battery and Charger Safety
General
WARNING: Risk of fire and electric shock—The
batteries have no user-serviceable parts.
•
Confirm the voltage that is available in your
country before using the charger.
•
Do not charge the machine in a wet environment;
keep it protected from rain and snow.
•
A risk of fire, electric shock, or injury may result
from using an accessory not recommended or
sold by Toro.
•
To reduce risk of a battery explosion, follow these
instructions and the instructions for any equipment
that you intend to use near the charger. To reduce
risk of a battery explosion, follow these instructions
and the instructions for any equipment that you
intend to use near the charger.
•
Refer to an authorized Toro distributor to service
or replace a battery.
Training
•
Never allow children or untrained people to
operate or service the charger. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Read, understand, and follow all instructions on
the charger and in the manual before operating
the charger. Be familiar with the proper use of the
charger.
Preparation
•
Keep bystanders and children away while
charging.
•
Shut off the machine and wait until the machine
has completely powered down before charging.
Failure to do this may cause arcing.
•
Use the charger only within the voltage range
specified in this Operator's Manual, and use only
a power cord approved by Toro.
•
Contact your authorized Toro distributor for the
proper charger and power cord.
Operation
•
Do not charge a frozen battery.
•
Do not abuse the cord. Do not pull on the power
supply cord to disconnect the charger from the
receptacle. Store the cord away from heat, oil,
and sharp edges.
•
Connect the charger directly to a grounding
receptacle. Do not use the charger on an
ungrounded outlet, even with a grounding adapter.
•
Do not alter the provided power cord or plug.
•
Remove metal items such as rings, bracelets,
necklaces, and watches when working with a
lithium-ion battery. A lithium-ion battery can
produce enough current to cause a severe burn.
•
Use an extension cord that can handle the
charging amperage specified in this Operator's
Manual. If you are charging outdoors, use an
extension cord rated for outdoor use.
•
If the power supply cord is damaged while it
is plugged in, disconnect the cord from the
wall receptacle and contact an authorized Toro
distributor for a replacement.
•
Unplug the charger from the electrical outlet when
not in use, before moving it to another location, or
prior to servicing it.
Maintenance and Storage
•
Do not disassemble the charger.
•
Take the charger to an authorized Toro distributor
when service or repair is required.
•
Unplug the power cord from the outlet before
starting any maintenance or cleaning to reduce
risk of electric shock.
•
Maintain or replace safety and instruction labels
as needed.
23