Rear Panel - Inter-m DLM-1108 Operation Manual

Rear Panel

Rear Panel
1
AC INPUT
1. AC POWER INPUT TERMINAL
This terminal supplies power to this instrument. The power used is AC 120-240V, 50/60Hz. Do not
excessively bend, pull, twist, heat, or cut the power cord. Doing so may damage the cord and cause
fire or electric shock.
2. AC POWER SWITCH
This switch turns the AC power of the equipment on and off.
3. DC 24V POWER INPUT TERMINAL
This is an emergency spare battery (DC 24V) connection terminal. If an AC power failure occurs, the
equipment operates with the connected spare battery. When DC 24V power is applied to the equip-
ment, the equipment always operates regardless of the power switch.
4. RS-232C CONNECTION TERMINAL
This terminal controls equipment through RS-232C communication such as CD-6208 and TU-6200.
Device control is controlled by the main software (MS-N300), and this device receives the protocol
through the network and transmits it to the RS-232C communication device.
5. NETWORK CONNECTION TERMINAL
This is the terminal that connects the equipment to the network. Broadcasting can be controlled via
integrated software.
※ For setting method, refer to the integrated software manual. Please download the manual from the
website (www.inter-m.net).
2 3
ON
OFF
POWER DC INPUT
DIGI-LINK MULTI CONTROLLOR
4
SOURCE 8 SOURCE 7 SOURCE 6
SOURCE 4 SOURCE 3 SOURCE 2
SOURCE 5 2 1
SOURCE 1 NETWORK
5 6
DLM-1108 5