Unpacking And Setting Up The Machine - Proxxon PD 400 CNC-ready Commissioning Manual

6.

6. Unpacking and setting up the machine

Please note:
The information given in this manual and the knowledge it conveys is indispensable for
the safe commissioning and the safe operation of the machine and the controls!
Please read the manual attentively and make sure you have understood the contents!
Carefully unpack the individual components from the Styrofoam packaging. Please
check for completeness of the delivery by using the list in the chapter "Scope of
Supply".
Caution!
Do not grasp the gear case, the motors, or the cover of the motor to lift the machine
out of the Styrofoam packaging. The plastic caps could break.
Please enlist the aid of a helper to lift your PD 400 CNC-ready out of the package as
illustrated in the figure on the right.
8