Care And Maintenance Checklist; Disposal; Compilation Of Safety Notes - Proxxon PD 400 CNC-ready Commissioning Manual

9.6. Care and maintenance checklist

Some elements affect the precision and work safety and must therefore be checked
regularly.
Here the following checklist for this purpose:
• Guides – clean and dry?
• Spindles free of machining residues ?
• Fastening screws are tight?
• Alignment: Are tables at right angles?
• Open the spindle covers for inspection: must swarf be removed by
vacuuming?
If required, the following maintenance activities are necessary:
• Clean the shafts, rub them dry, open the covers and clean or oil the spindle
system.
• Readjust the guides in case the carriages have play
• Rub aluminium surfaces with acid-free oil.
If the CNC machine will be decommissioned for a longer period of time, it should be
stored in a dry room at a minimum temperature of 5°C.
A cover to protect from dust and environmental effects is sensible.

10. Disposal:

Please do not dispose of the device in the household waste! The device contains valuable
substances that can be recycled. If you have any further questions, please contact your
municipal disposal company or other appropriate municipal institutions.

11. Compilation of safety notes

As with any other machine, there are some things that need to be observed when
operating the CNC lathe PD 400 CNC-ready so that dangers to humans and the
environment cannot occur.
In this context, please also observe the separately enclosed pamphlet with the safety
notes.
Special noise protection
18
This can be achieved through ear protection, a protective
cell, or a closed room. Also, clamp the tools short so they
do not vibrate so strongly