Something General In Advance - Proxxon PD 400 CNC-ready Commissioning Manual

WARNING
Read all safety warnings,
provided with
Failure to follow all instructions
serious injury.
Save all warnings and
The term "power tool" used in the safety instructions refers to mains-operated power tools
(with mains lead) or battery-operated power tools (without mains lead).

1. Something general in advance:

Please note:
The information given and knowledge imparted in this manual are indispensable for the
safe commissioning and operation of the machine and the control system!
Therefore, read the manual carefully and make sure that you have understood the
contents!
WARNING
Familiarise yourself with the potential dangers of the machine before commissioning the
selected software control machine tool configuration! Observe all safety instructions from
this machine tool and from the manufacturer of the selected control. Note that the user
alone is responsible for safety when operating the application.
DANGER
In case of damage, do not touch any parts of the installation, disconnect the power supply
and send the parts concerned to a qualified service workshop, ideally to our central
service.
WARNING
Observe the electrical values specified in the technical data for controlling the stepper
motors of the machine tool. Make sure that the electrical configuration of the control is
compatible with the electrical data of the motors!
instructions,
this power tool.
listed below may result
instructions for future
illustrations and specifications
in electric
reference.
shock, fire and l or
3