Table of Contents
Advertisement
Please note
Under no circumstances should the extractor be connected to any
gas ventilation system, flue system or hot air ducting system.
Do not vent the extractor into an attic or loft space.
Only house the extractor in rooms with adequate ventilation.
Remember that the extractor is powerful and whatever air is
extracted needs to be replaced.
Do not tile the extractor in. It should be removable for service or
maintenance.
Do not use silicone sealant to secure the hood to the wall.
You must be able to isolate the extractor from the mains electrical
supply after installation.
This extractor has been designed to be used in a room with a volume
of less than 36m³.
Steam cleaners must not be used when cleaning this appliance.
The performance of your extractor will vary depending on several
factors. These include type of extraction, length of ducting, room
volume, ventilation available and cleanliness of the filters.
The extractor should be cleaned regularly to prevent build-up of
grease. We recommend cleaning both inside and outside the
appliance monthly. Failure to observe the requirements specified
in this manual can result in a fire risk.
Instruction Manual | 5
Advertisement
Table of Contents
