Advertisement
.
When the remote controller operating, be sure to touch the buttons with your fingers or Stylus pen.
The operation panel may not work properly in the following cases.
* The operation panel is touched with a sharp-pointed instrument.
screen and touch it again.
Touching the screen again without pause may result in false detection. Touching on the
screen strongly does not enhance the detection sensitivity.
The response of operation panel depends on the ambient temperature and humidity, physi-
cal condition of the user, and operating conditions of the electric appliances.
Press
button on the wireless receiver
for 3 seconds or more until orange
blinks.
The pairing mode is cancelled by pressing
button.
Touch,
and
for at least 3 seconds until the mode num-
ber blinks.
Touch
or
button to set the mode
number to "1" and touch
LED
buttons simultaneously
button.
<Reciever Top view>
Blinking (orange)
<Remote controller Display>
EN
Mode No.
8
Advertisement
