Table of Contents
Advertisement
EN 104
8.
PB52.1HU LB
•
Repeat this step for the other color temperatures that need
to be aligned.
•
When finished press OK on the RC and then press STORE
(in the SAM root menu) to store the aligned values to the
NVM.
•
Restore the initial picture settings after the alignments.
Table 8-2 White D alignment values
Value
Cool (11000 K)
x
0.278
y
0.278
If you do not have a color analyzer, you can use the default
values. This is the next best solution. The default values are
average values coming from production (statistics).
8.4
Option Settings
8.4.1
Introduction
The microprocessor communicates with a large number of I
ICs in the set. To ensure good communication and to make
digital diagnosis possible, the microprocessor has to know
which ICs to address. The presence / absence of these specific
ICs (or functions) is made known by the option codes.
8.4.2
Opt. No. (Option numbers)
Select this sub menu to set all options at once (expressed in
two long strings of numbers).
An option number (or "option byte") represents a number of
different options. When you change these numbers directly,
you can set all options very quickly. All options are controlled
via eight option numbers.
When the NVM is replaced, all options will require resetting. To
be certain that the factory settings are reproduced exactly, you
must set both option number lines. You can find the correct
option numbers on a sticker inside the TV set and in Table
"Option code overview".
8.4.3
Option Code Overview
Table 8-4 Option code overview
CTN
12NC
22HFL5530H/27
867000041232 M220Z1-L03 ver 2.1
Important: after having edited the option numbers as
described above, you must press OK on the remote control
before the cursor is moved to the left!
Alignments
Normal (9000 K)
Warm (6500 K)
0.289
0.314
0.291
0.319
Display type
Display code
169
•
Select a COLOUR TEMPERATURE (e.g. COOL,
NORMAL, or WARM).
•
Set the RED, GREEN and BLUE default values according
to the values in the "Tint settings" table.
•
When finished press OK on the RC, then press STORE (in
the SAM root menu) to store the aligned values to the NVM.
•
Restore the initial picture settings after the alignments.
Table 8-3 Tint settings
Colour Temp.
Cool
Normal
Warm
Notes:
•
After changing the option(s), save them by pressing the OK
button on the RC before the cursor is moved to the left,
2
C
select STORE in the SAM root menu and press OK on the
RC.
•
The new option setting is only active after the TV is
switched "off" / "stand-by" and "on" again with the Mains
switch (the NVM is then read again).
Example: The options sticker gives the following option
numbers:
•
57768 03076 08515 13923
•
59272 00068 00000 00000
The first line (group 1) indicates hardware options 1 to 4, the
second line (group 2) indicates software options 5 to 8.
Every 5-digit number represents 16 bits (so the maximum value
will be 65536 if all options are set).
When all the correct options are set, the sum of the decimal
values of each Option Byte (OB) will give the option number.
See tables "Option code overview" for the options.
Group 1
OB1
OB2
OB3
57770
03333
08515
R
G
122
120
125
118
127
110
Group 2
OB4
OB5
OB6
13923
26537
00064
B
121
108
75
OB7
OB8
00000
00000
Advertisement
Table of Contents
