Table of Contents
Advertisement
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof lock
The hob must be switched off.
To activate: Touch the
D
symbol lights up for 10 seconds. The hob is locked.
D
To deactivate: Touch the
The lock is released.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof lock on
in the section
Cleaning lock function
Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
symbol. A signal sounds. The control panel is
>
locked for 35 seconds. The control panel surface can now be
cleaned without the risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be turned off when desired.
Indicator
Function
Childproof lock
™‚
Deactivated.*
‹
‚
Activated.
Audible signals
™ƒ
‹
Confirmation and error signals deactivated.
Only error signal activated.
‚
ƒ
Only confirmation signal activated.
All signals activated.*
„
Display energy consumption
™„
Deactivated.*
‹
‚
Activated.
Automatic programming of cooking time.
™†
‹
Switched off.*
-
Automatic shut-off time.
‚
ŠŠ
™‡
Duration of the time program function warning signal
10 seconds*.
‚
30 seconds.
ƒ
1 minute.
„
*Factory settings
symbol for approx. 4 seconds. The
symbol for approx. 4 seconds.
D
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
heat indicator
/
flash alternately in the display.
œ
•
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Displaying energy consumption
This function displays total energy consumption for the time the
hob has been switched on.
After switching off the hob, the consumption in kWh is
displayed for 10 seconds.
An example is shown in the image with a consumption of
‚
.
‹‰
kWh.
The Basic Settings chapter provides information on activating
this function.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
,
symbol and the residual
"
‰
17
Advertisement
Table of Contents
