Table of Contents
Advertisement
Positioning the pan stands
The pan stands are provided unassembled
on the hob. To install the grids correctly,
follow the instructions as shown in the figure.
Correct positioning of the flame-
spreader crowns and burner caps
Before lighting the hob burners, check that
the flame-spreader crowns are correctly in
place with their respective burner caps,
making sure that the holes (A) in the burner
are aligned with the igniters and
thermocouples (B).
1 - Burner cap internal (UR)
2 - Burner cap external (UR)
3 - Burner cap (AUX, SR)
4 - Flame spreader crowns
Use
Practical tips for using the hob
For better burner efficiency and to minimise
gas consumption, use pans with lids and of
suitable size for the burner, so that the
flames do not reach up the sides of the pan.
Once the contents come to the boil, turn
down the flame far enough to ensure that
the liquid does not boil over.
Cookware diameters:
• AUX: 7 - 18 cm.
• SR: 10 - 24 cm.
• UR: 12 - 26 cm.
To prevent burns or damage to the hob or
the counter top during cooking, all
cookware or griddles must be placed
inside the perimeter of the hob.
Always check that the control
knobs are in the
when you finish using the
appliance.
(off) position
11
Advertisement
Table of Contents
