Table of Contents
Advertisement
5 Installation
5.1 Important notes
Read these instructions carefully and keep
them in a safe place. Safety during use can
only be ensured if the appliance is fitted
correctly according to these installation
instructions. The registered gas installer is
responsible for ensuring that the appliance
operates perfectly at the point of
installation.
ATTENTION! According to the Gas
Safety Ordinance of Hong Kong, any
gas installation works including the
installation of appliances and connection
tubing, must be undertaken by registered
gas installers who are registered for that
appropriate classes and be employed by
registered gas contractors.
Use approved gas tubing bearing EMSD
approval marking (such as
EMSD APPROVAL GTXXXX) for
connection to appliances, or other
appropriate methods accepted by
EMSD.
Before carrying out any type of work, turn
off the electricity and gas supply.
For installation, currently applicable
building regulations and the regulations of
local electricity and gas suppliers must be
observed.
For town gas connection, the external gas
governor (MAXITROL model no. RV47LM-
Rp-1/2", working pressure 1.0kpa) must
be installed.
Installation
5.2 Safety instructions
Heat production during appliance
operation
Risk of fire
• Make sure that the cabinet material is
heat resistant.
• Check that the cabinet has the required
slots.
Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (>90 °C), otherwise they might
warp over time.
The minimum clearance between a
ventilation hood and the cooking
surface must be at least the
distance indicated in the ventilation
hood installation instructions.
The minimum clearances must also be
respected for the edges of the hob on the
back as indicated in the mounting
illustrations.
15
Advertisement
Table of Contents
