Table of Contents
Advertisement
According to the Gas Safety Ordinance of
Hong Kong, any gas installation works
including installation of appliances and
connection tubing, must be undertaken by
registered gas installers who are registered
for that appropriate classes and be
employed by registered gas contractor.
After installation, please make sure
that the hoses do not come into
contact with moving parts such as
drawers.
Connection with a steel hose with conical
fitting
Make the connection to the gas mains
using a continuous wall steel hose whose
specifications comply with the applicable
standard.
Carefully screw the conical hose connector
3 to the appliance's gas connector 1 (½"
thread ISO 228-1), placing the supplied
seal 2 between them. Apply insulating
material to the thread of connector 3, then
tighten the steel hose 4 to the connector 3.
Installation
Room ventilation
The room where the appliance is installed
must have enough air flow for the regular
combustion of gas and the necessary air
change in the room itself. The room must be
kept adequately ventilated in order to
eliminate the heat and humidity produced
by cooking: In particular, after prolonged
use, you are recommended to open a
window or to increase the speed of any
fans.
Lubricating the gas taps
Over time the gas taps may become difficult
to turn and get blocked. Clean them
internally and replace the lubrication
grease.
Lubrication of the gas cocks should
be performed by a specialised
technician.
19
Advertisement
Table of Contents
