Residual Risks; Technical Data; Unpacking - Scheppach SBT-80 Translation Of Original Instruction Manual

• Operate the product at an air pressure between 4.6
and a maximum of 8 bar! If the pressure is higher,
the product may be damaged! This can also put peo-
ple at risk.
• Before each use, check all hoses and other connec-
tions for firm seating and for damage.
Safety instructions for working with the blasting
gun
• Ensure there is sufficient distance to the product, at
least 2 m, and keep the blasting gun away from the
product during operation.
• Do not direct the pressure line or the blasting gun
towards yourself, other people or animals.
Operation of pressure vessels
• Anyone who operates a pressure vessel must keep
this in good working order, operate and monitor it
correctly, perform the necessary maintenance and
servicing works immediately and implement safe-
ty measures as required according to the circum-
stances.
• The regulatory authority can instruct necessary
monitoring measures in individual cases.
• A pressure vessel must not be operated if it exhib-
its a defect that poses a danger to personnel or
third parties.
• Check the pressure vessel for rust and damage
each time before use. The pressure vessel shall not
be operated if the pressure vessel is damaged or
rusty. If you discover damage, please contact the
customer service workshop.

6. Residual risks

Neglect of ergonomic principles
Negligent use of personal protective equipment
(PPE)
Careless use or omission of personal protective
equipment may result in serious injury.
• Wear prescribed protective equipment.
Human behaviour, misconduct
• Always concentrate fully on all work.
Residual danger - Can never be excluded.
26 | GB
Behaviour in an emergency
In case of an accident, initiate the necessary first aid
measures and seek medical assistance as quickly as
possible.
7.

Technical data

Dimensions
(LxWxH mm)
Tank dimensions
(ØxH mm)
Pressure vessel volume (l)
Air consumption min (l/min)
Operating pressure (bar)
Blasting material to be used
Max. filling quantity of blasting
material (l)
Blasting hose length (m)
Blasting material diameter
Weight (kg)
Subject to technical changes!

8. Unpacking

• Open the packaging and carefully remove the prod-
uct.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
www.scheppach.com
700x380x840
382x674
63
170 - 240
4.1 - 8.6
Glass beads
Silicon carbide
Aluminium oxide
42
2,5
0.15 - 0.25 mm
28,1