Residual Risks; Technical Data - Scheppach MGT410 Translation Of Original Operating Manual

m Be careful when going backwards – risk of trip-
ping!
Immediately remove cut branches/knots from the
work area to prevent injuries.
Walk! Do not run! As soon as a branch being cut off
starts cracking and falling down, move to the side
immediately and keep safe distance from the fall-
ing wood as it can hurl back up and cause injuries.
Switch the appliance immediately off and remove
the replaceable battery from the appliance when the
saw chain gets blocked. Remove the blocked object.
When working, keep the appliance firmly with both
hands and with a distance from your body.
Make sure the appliance is off before inserting a bat-
tery.
The ON/OFF switch and safety switch must not be
locked.
m Before using, check the tightness and proper
seating of all screwed and socket joints and protec-
tive equipment and if all moving parts are moving
smoothly.
m It is strictly prohibited to demount, adjust and al-
ienate the protective equipment on the machine or
put other protective equipment on the machine.
m Do not use the appliance if damaged or the safety
equipment is defective. Replace any worn and dam-
aged parts.
Do not use the device near flammable liquids or gas-
es. Risk of fire and explosion in case of short circuit.
m Warning! This electric tool generates an electro-
magnetic field during operation. This field can im-
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
Battery
Vapours may leak out in case of unauthorised use or
when using a damaged accumulator. Bring fresh air
and seek medical advice if experiencing difficulties.
Vapours may irritate the respiratory system.
m Risk of fire! Risk of explosion!
Never use damaged, defective or deformed accumu-
lators. Never open or damage the accumulator or let
it fall on the ground.
Never charge the battery in an environment with ac-
ids and easily flammable materials.
Protect the battery against heat and fire.
Battery to be used at the ambient temperatures be-
tween 10°C and +40°C only.
Never put the battery on heaters and do not expose
it to strong sunlight for a long time.
After being subject to heavy load, let the battery cool
down first.
Short circuit - do not bridge the accumulator contacts
with metal parts.
The accumulator must be packaged (plastic bag,
box) or accumulator contacts must be sealed up for
accumulator disposal, transport or storage.

Residual risks

Even when the device is used properly and all safe-
ty regulations are complied with, there still may be
some residual risks.
• Cutting injury
• Hearing damage
A longer stay in the immediate vicinity of the run-
ning unit may cause hearing damage. Wear ear
protectors!
• Damage to health arising from vibrations to hand
and arms if the device is used for a long time or if
the device is not guided and evaluated properly.
• Vibration dampening systems do not guarantee
protection against Raynaud syndrome or carpal
tunnel syndrome. For this reason, the condition of
the fingers and the wrist must be thoroughly moni-
tored in case of regular, continuous use of the de-
vice. If symptoms of the illnesses indicated above
occur, contact a doctor immediately. To reduce the
risk of Raynaud syndrome, keep your hands warm
while working and take breaks at regular
Despite the observance of the operating instructions
there still may be some hidden residual risks.

Technical data

Pole Saw
Cutter bar length
Max. Cutting length
Chain pitch
Chain thickness
Sprocket wheel
Cutting speed at rated rpm:
Oil tank capacity
Saw chain
Cutter bar
Hedge Trimmer
Max. cutting length
Tooth spacing
Cuts
Cutting Diameter max.
intervals.
240 mm
203 mm
3/8"
1.3 mm
6 Teeth, 3/8"
4 m/s
0.09 l
Oregon 91P033X
Oregon 080NDEA318
410 mm
15 mm
1250 /min
15 mm
GB 23