ZyXEL Communications AX Series User Manual page 471

Table 181 Maintenance > User Account > User Account Add/Edit (continued)
LABEL DESCRIPTION
Group
Specify whether this user will have Administrator or User privileges. An Administrator account can
access all Web Configurator menus. A User account can only access Monitor and Maintenance
menus.
The maximum account number of Administrator and User are both four. The total number of the
users allowed to log in the Zyxel Device at the same time is eight.
The Administrator privileges are the following:
• Quick Start setup.
• The following screens are visible for setup:
Broadband, Wireless, Home Networking, Routing, NAT, DNS, Firewall, MAC Filter, Voice, Log,
Traffic Status, ARP Table, Routing Table, Cellular WAN Status, System, User Account, Remote
Management, Time, Email Notification, Log Setting, Firmware Upgrade, Backup/Restore,
Reboot, Diagnostic.
The User privileges are the following:
• The following screens are visible for setup:
Log, Traffic Status, ARP Table, Routing Table, Cellular WAN Status, User Account, Remote
Management, Time, Email Notification, Log Setting, Firmware Upgrade, Backup/Restore,
Reboot, Diagnostic.
Remote Select whether this user can access the Zyxel Device with HTTP, Telnet or SSH through the WAN,
Privilege LAN or LAN/WAN. Only the Administrator is allowed to use Telnet and SSH for remote
management.
Cancel Click Cancel to restore your previously saved settings.
OK Click OK to save your changes.
Chapter 36 User Account
AX/DX/EX/PX Series User's Guide
471