ZyXEL Communications AX Series User Manual page 220

Table 48 Network Setting > Broadband > Add or Edit New WAN Interface (Routing Mode) (continued)
LABEL DESCRIPTION
DS-Lite
This is available only when you select IPv6 Only in the IPv4/IPv6 Mode field. Enable Dual Stack
Lite to let local computers use IPv4 through an ISP's IPv6 network. See
202 for more information.
Click this switch to enable DS-Lite to let local computers use IPv4 through an ISP's IPv6 network.
DS-Lite Relay Specify the transition router's IPv6 address.
Server IP
6RD
The 6RD (IPv6 rapid deployment) fields display when you set the IPv6/IPv4 Mode field to IPv4 Only. See
Deployment on page 202
Click this switch to tunnel IPv6 traffic from the local network through the ISP's IPv4 network.
Select Manually Configured if you have the IPv4 address of the relay server. Otherwise, select
Automatically configured by DHCPC to have the Zyxel Device detect it automatically through
DHCP.
The Automatically configured by DHCPC option is configurable only when you set the method of
encapsulation to IPoE.
Service Provider Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP's border relay router and connecting to the
IPv6 Prefix native IPv6 Internet.
IPv4 Mask Enter the subnet mask number (1 – 32) for the IPv4 network.
Length
Border Relay When you select Manually Configured, specify the relay server's IPv4 address in this field.
IPv4 Address
DHCPv6 Option (This is available only when you select IPv6 Only or IPv4 IPv6 DualStack in the IPv4/IPv6 Mode field.)
IPv6 Address Click the switch (to the right) to let the Zyxel Device send DHCP requests to the DHCPv6 server to
From DHCPv6 obtain an IPv6 address.
Server
Other Click the switch (to the right) to have the Zyxel Device get other information, such as DNS
Information information, from DHCPv6 packets sent from the DHCPv6 server.
From DHCPv6
This will be enabled if IPv6 Address From DHCPv6 Server is enabled.
Server
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.
Bridge Mode
Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon next to the
connection you want to configure. The following example screen displays when you select Bridge
mode.
Chapter 8 Broadband
for more information.
AX/DX/EX/PX Series User's Guide
220
Dual Stack Lite on page
IPv6 Rapid