Checking Your Network Topology - ZyXEL Communications AX Series User Manual

Table 30 Link Quality
ICON

6.6 Checking Your Network Topology

Network topology displays how your Zyxel Devices are connected in the same MPro Mesh network. An
MPro Mesh network consists of a Controller and one or more extenders. Follow the steps below to see
the current topology of your MPro Mesh network and the status of the Zyxel Devices in this network.
Tap the (
1
Chapter 6 App Tutorials
CONNECTION TYPE CONNECTION STATUS
Wireless Too Far from the Router
Wired/Wireless No Connection
) icon to check the MPro Mesh network topology.
AX/DX/EX/PX Series User's Guide
ACTION TO DO
• Move the Extender closer to the Router/uplink
Extender.
• Avoid obstacles, such as walls or doors in
between.
• Make sure the Extender is still powered on.
• Wired: Make sure the Extender's LAN port is
correctly connected to the Router/uplink
Extender's LAN port through an Ethernet
cable.
• Wireless: Move the Extender closer to the
Router/uplink Extender where the Extender
can receive the Router/uplink Extender's WiFi
signal.
152