ZyXEL Communications AX Series User Manual page 118

Add New PCP Screen
Go to Parental Control > Add New PCP. Under General:
1
• Select Enable to enable the rule you are configuring.
• Enter the Parental Control Profile Name given in the above parameter.
• Select an user this rule applies to in Home Network User, then click Add. You will see the MAC address
of the user you just select in Rule List.
Under Internet Access Schedule:
2
• Click Add New Time to add a second schedule.
• Use the parameter given above to configure the time settings of your schedule.
Under Network Service:
3
• In Network Service Setting, select Block.
• Click Add New Service, then use the parameter given above to configure settings for the Internet
service you are blocking.
Chapter 5 Web Interface Tutorials
AX/DX/EX/PX Series User's Guide
118