Table of Contents
Advertisement
4. Tap any location on the sentry zone. The pop up menu appears.
5. Tap [Resize SZ]. The sentry zone now appears with a yellow colored dashed line
and a box appears at each corner of the zone.
6. Drag the corners to resize or relocate the sentry zone.
7. Tap [Save] to save the changes, or tap [Cancel] to discard any changes. The sen-
try zone now appears in the new location.
8. Tap any location on the sentry zone. The pop up menu appears.
9. Tap [Notif.]. The notification settings appear.
10. Set the notifications for the sentry zone, referring to the list below.
• [OFF]: Disables notification for the selected sentry zone.
• [IN]: Notifications appear only when a target enters the sentry zone.
• [OUT]: Notifications appear only when a target exits the sentry zone.
If you selected [IN] or [OUT], the sentry zone outline changes from dashed lines
to solid lines.
Note: You can only hide a sentry zone by setting the zone to [OFF] from the layered
menu.
9.13
How to Change Echo Colors
You can change the color for radar echoes.
1. From the [Home] screen, tap [Settings] => [Radar] => [General]. The menu op-
tions appear in the right-hand side of the screen.
2. Tap the color indication at [Echo Color], then tap the color you require. [Multicolor]
colors the targets based on echo signal strength, with red color for the strongest
signals, yellow for medium-strength signals and green for weak signals.
3. Tap the [x] at the top-right corner of the menu to close the menu.
9.14
Changing Background Color
The system has two color schemes, Day and Night, each with their own background
colors.
Sentry zone
corner. Drag to
resize or move.
9. RADAR
9-5
Advertisement
Table of Contents
