Table of Contents
Advertisement
7. ROUTES
7.13.5
How to adjust the size of the arrival notification area
The arrival notification area is a fixed-radius area around each route point and is
shown as a dotted red circle. The area is used to calculated the turning point towards
the next route point and also as a notification trigger. You can adjust the size (radius)
of the area.
Arrival
notification
area
1. From the [Home] screen, tap [Settings] => [Routes] => [Routes]. The route menu
options appear in the right-hand side of the screen.
2. At [Circle Radius] in the menu options, set the size of the area.
Drag the slider on the slide bar to change the size, or tap the keyboard icon, enter
a value, then tap [OK].
3. Tap the [x] at the top-right corner of the menu to close the menu.
7.13.6
How to enable/disable the arrival notification
When you approach the final point in a route, a pop up message appears to inform you
that the route is completed.
Note: If you set [Arriving at Destination] to [ON], in the [Notifications] menu, an audible
beep is also released when you reach the preset distance from the destination.
1. From the [Home] screen, tap [Settings] => [Routes] => [Routes]. The route menu
options appear in the right-hand side of the screen.
2. Tap the toggle box at [End Route Notification] to show [ON] or [OFF] as required.
3. Tap the [x] at the top-right corner of the menu to close the menu.
7.13.7
How to keep or discard a route destination once you arrive
By default, a route destination is kept after you arrive and the route remains active.
You can discard the destination and the route remains saved but becomes inactive.
1. From the [Home] screen, tap [Settings] => [Routes] => [Routes]. The route menu
options appear in the right-hand side of the screen.
2. Tap the toggle box at [Keep Destination] to show [ON] or [OFF] as required.
3. Tap the [x] at the top-right corner of the menu to close the menu.
7-10
Advertisement
Table of Contents
