Advanced Console Functions - True M50 Owner's Manual

HRC Cruise Control
While in any program, cruise control will allow the user to set current heart rate as target heart rate by pressing a single
button. The cruise control program takes control of speed and incline to maintain the users target heart rate. If beats per
minute exceeds the target by more than 12 bpm the workout will end and cool down will begin.
Custom Workouts 1-2
This workout is user defi ned. There is a range of 1-60 segments available to the user to build a workout. Each workout
segment is adjustable in time from 1-10 minutes in one minute intervals.
1. Press CUSTOM WORKOUTS until CUSTOM WORKOUTS is displayed, and then press Enter.
Segment 1 will be displayed.
2. Use + or – to adjust segment time and press Enter.
3. Use + or – to adjust segment speed and press Enter.
4. Use  or  to adjust segment incline and press Enter.
Segment 2 will be displayed.
5. Use + or – to adjust segment time and press Enter.
6. Use + or – to adjust segment speed and press Enter.
7. Use  or  to adjust segment incline and press Enter.
8. Set up to 60 available segments in a custom workout.
9. Start a custom workout at any time by pressing the Start key or after all 60 segments have been set up, the display will
prompt PRESS START.

ADVANCED CONSOLE FUNCTIONS

WARNING:
Misconfi guration of the console may cause damage to the unit and void the manufacturer warranty. If
!
necessary, please contact TRUE product support (service@truefi tness.com // 800.883.8783) for assistance.
Diagnostics Mode
Diagnostics mode contains several tools and information that are useful in diagnosing technical issues.
To Enter Diagnostics Mode
1. Remove the safety key.
2. Press and hold the + and – speed keys until the console beeps (approximately 3 seconds).
3. Re-insert the safety key.
To Navigate Diagnostics Mode
1. Use the up  and down incline keys to scroll through the available options.
2. Press Enter to make a selection.
Diagnostic Options
• Total Time—The total number of hours the unit has been used.
• Total Distance—The total distance the unit has run.
• Average Speed—The overall average speed at which the unit has been used.
• Cooldown Time—Adjusts the length of the cooldown workout segment (use the + and - speed keys).
• Error Log—Contains a list of recent error codes to assist with troubleshooting.
To Exit Diagnostics Mode
Power cycle the unit to exit diagnostics mode.
27