Technical Data - Beijer Electronics X2 base 10 Installation Manual

Technical Data

4. Technical Data
Parameter
Front panel, W×H×D
Cutout dimensions, W×H
Mounting depth
Standalone mounting
Front panel seal
Rear panel seal
Sealing
Touch screen material
Frame overlay
Touch screen operations
Reverse side material
Frame material
Weight
CPU
Serial port COM A
Serial port COM B
Ethernet
USB
Flash memory
(application memory)
Memory RAM
NVRAM
LED
Real time clock
Battery
2023-09
284.3 × 186.6 × 7.5 mm
274.3 ± 0.8 × 176.6 ± 0.8 mm
44.7 mm (145 mm including clearance)
VESA 75 × 75
Note: Maximum screw length for VESA mounting is 4 mm. Usage of
longer screws may lead to damage.
IP 65
IP 20
IP65 (IP65 for IECEx \ ATEX)
IP66 (IP65 for IECEx \ ATEX)
Polyester on glass, ITO film, resistive
Autoflex EBA 180L
1 million finger touch operations
Plastic (PC+ABS)
Plastic (PC+ABS)
1.3 kg
400 MHz ARM9
Standard D-sub (9 Pin, female)
COM1: 1×RS-232 Rx/Tx with RTS/CTS
COM2: 1×RS-422 or 1×RS-485 or 1×CAN2.0B
*Not supported for X2 pro 7/10/15web or X2 extreme 7/12/15 HP
web.
M12 (8 pin, female)
Standard D-sub (9 Pin, female)
COM3: 1×RS-232 Rx/Tx with RTS/CTS
COM4: 1×RS-485
*Not supported for X2 control 7/10/15 web or X2 extreme 7/12/15
HP web.
10/100 Mbit Base-T (shielded RJ45 with LEDs)
Supports up to USB 2.0 High Speed
256 MB SSD (NAND Flash)
Application memory 200 MB
128 MB (DDR2)
N/A
1 × blue/red software programmable
Yes
Lithium ion, 3V / 200mAh
14
X2 base 10
Beijer Electronics, MAEN182