Advertisement
8.
Install the hydraulic hose (90° elbow fitting) to
the straight fitting on the manifold, route it back
to the hydraulic fluid cooler, and attach the 90°
elbow fitting to the hydraulic fluid cooler; refer to
Figure
10,
Figure
Note:
Ensure the hose is routed away from hot
surfaces, not rubbing on other parts, and not
being pinched.
Figure 11
1. Hydraulic hose (90° elbow fitting)
11, and
Figure
12.
1. 90° elbow fitting connected to the hydraulic fluid cooler
g390663
9
Figure 12
g390674
Advertisement
