Advertisement
Figure 15
1. Hydraulic tube (no port)
12.
Install the hydraulic hoses to the mid-ports in
the hydraulic tubes and to the hydraulic cylinder
(Figure 10
and
Figure
Figure 16
1. Hydraulic hose, 48 cm (19
inches)
g389243
16).
g389236
2. Hydraulic hose, 65 cm
(25-1/2 inches)
5
Installing the Laser
Controller Mount
Parts needed for this procedure:
2
Bolt (1/4 x 5/8 inch)
1
Locknut (#6)
2
Carriage bolt (#10 x 5/8 inch)
1
Laser controller mount
2
Nut (#10)
1
Grommet
1
Screw (#6 x 1/2 inch)
2
Nut (1/4 inch)
Procedure
1.
Install the grommet into the large hole in the
laser controller mount
2.
Install the RAM
display kit) to the mount as shown in
3.
Install the electrical caps (provided with the
display kit) to the mount as shown in
4.
Install the laser controller mount to the machine
as shown in
Figure
11
(Figure
17).
®
mount (provided with the
Figure
Figure
17.
17.
17.
Advertisement
