Toro 08865 Installation Instructions Manual page 14

4. Install the proximity switch assembly to the
chassis using 2 carriage bolts (1/4 x 3/4 inch)
and locknuts (1/4 inch) as shown in
Figure 20
1. Carriage bolts (1/4 x 3/4
inch)
2. Proximity switch assembly
5. Remove the locknut, flange bushing, and
carriage bolt from the forward joint of the
standing platform as shown in
Figure 20.
g411640
3. Chassis plate
4. Locknuts (1/4 inch)
Figure 21.
6. Install the flange bushing and spring to the
activator bracket (A of
the assembly to the forward joint of the standing
platform (B of
removed in step 5.
1. Spring
2. Activator bracket
3. Bushing
14
Figure 21), then install
Figure 21) using the hardware
Figure 21
4. Flange locknut
5. Carriage bolt
g411643