ST STM32CubeF2 Getting Started page 12

STM32CubeF2 firmware package overview
The examples are classified depending on the STM32Cube level they apply to, and are
named as follows:
•
Examples in level 0 are called Examples, Examples_LL, and Examples_MIX. They use
respectively HAL drivers, LL drivers and a mix of HAL and LL drivers without any
middleware component.
•
Examples in level 1 are called Applications and provide typical use cases of each
middleware component.
The Template project is provided to allow to build quickly any firmware application on a
given board.
All examples have the same following structure:
•
\Inc folder that contains all header files,
•
\Src folder for the sources code,
•
\EWARM, \MDK-ARM, \TrueSTUDIO and \SW4STM32 folders contain the
preconfigured project for each toolchain,
•
readme.txt describes the example behavior and the required environment.
Table 3 provides the number of projects available for each board.
STM322xG_EVAL
STM32F207ZG-Nucleo
12/22
Table 3. Number of examples available on the boards
Board Examples
75
25
Examples_ Examples_
LL
NA
69
DocID026120 Rev 4
Applications Demonstration
MIX
NA 50
12 7
UM1739
0
1