Planar la1550ts lcd monitor user manual (20 pages)
Summary of Contents for Planar LA1500R
Page 1
LA1500R, LA1500RTR, and LA1500RTS USER’S GUIDE www.planar.com...
Page 2
A Planar part number will be modifi ed with an “LF” suffi x designation to indicate RoHS compliance, as shown on the part number label affi xed to the display and on the box containing the display.
Do not operate the product under the following conditions: - Extremely hot, cold or humid environment. - Areas susceptible to excessive dust and dirt. - Near any appliance generating a strong magnetic fi eld. - In direct sunlight. LA1500R, LA1500RTR and LA1500RTS User’s Guide ( 020-0319-03 Rev. A)
Introduction About Planar’s LA1500R / LA1500RTR / LA1500RTS The LA15 products all have a 15” fl at panel screen with an active matrix, thin-fi lm transistor (TFT) liquid crystal display (LCD). Features include: Direct analog graphics signal input Active matrix TFT LCD technology ...
Page 6
Operating force: Finger - < 50g (average) Transmittance: 76% (typ.) Driver: Windows® 7, Vista, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded Apple® Mac OS, Linux LA1500R, LA1500RTR and LA1500RTS User’s Guide ( 020-0319-03 Rev. A)
Page 7
Hardness of surface: Mohs’ Hardness rating of 7 Operating force: Typicaly less than 85g Transmittance: 92±5% Driver: Windows® 7, Vista, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded Apple® Mac OS, Linux LA1500R, LA1500RTR, and LA1500RTS User’s Guide ( 020-0319-03 Rev. A)
Page 11
768 resolution and make sure timing of the display mode is compat- ible with the LCD panel. “Video Modes” of this LCD panel are listed in the appendices for your reference. LA1500R, LA1500RTR, and LA1500RTS User’s Guide ( 020-0319-03 Rev. A)
Page 12
Figure 1.1 * For LA1500RTS only LA1500R, LA1500RTR and LA1500RTS User’s Guide ( 020-0319-03 Rev. A)
Power Switch Switches on/off the power of the LCD display. Power LED 1. Green indicates the display is turned on. 2. Amber indicates the display is in power-saving mode. LA1500R, LA1500RTR, and LA1500RTS User’s Guide ( 020-0319-03 Rev. A)
Choose the adjustment items by pressing the “+” and “-” buttons. The OSD menu will automatically close, if you have left it idle for a pre-set amount of time. LA1500R, LA1500RTR and LA1500RTS User’s Guide ( 020-0319-03 Rev. A)
Color Adjustment- It allows you to adjust the 0-100 Green green color of the display. Color Adjustment- It allows you to adjust the blue 0-100 Blue color of the display. LA1500R, LA1500RTR, and LA1500RTS User’s Guide ( 020-0319-03 Rev. A)
Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or visit Planar Support at www.planar.com/support. See support contact information on rear cover. Problem: No image appears on screen.
LCD display. When the signal is not included in the “Video Modes” list we have listed in the Appendices of this manual, the LCD display will display this message. LA1500R, LA1500RTR, and LA1500RTS User’s Guide ( 020-0319-03 Rev. A)
VESA SVGA 800 x 600 48.1 VESA SVGA 800 x 600 46.9 VESA XGA 1024 x 768 48.4 VESA XGA 1024 x 768 56.5 VESA XGA 1024 x 768 60.0 LA1500R, LA1500RTR and LA1500RTS User’s Guide ( 020-0319-03 Rev. A)
Resistive Touch screen with USB Connection (TouchKit Driver) The LA1500RTR is available with USB connection. The touch driver is located at www.planar.com/support for these operating systems: Windows® 7, VISTA, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux, Apple® Mac OS.
Page 24
3. Make sure that your EWF is disabled. If your EWF is enabled, please disable the EWF by using the EWF Manager command. 4. Once the EWF is disabled click on the XP driver at www.planar.com/ support and follow the step-by-step instructions as shown on the pop-up windows.
Page 25
SAW Touch screen with RS232 and USB Connections (TouchKit Driver) The LA1500RTS is available with both RS232 and USB connections. The touch driver is located at www.planar.com/support for these operating systems: Windows® 7, VISTA, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux, Apple®...
Page 26
3. Make sure that your EWF is disabled. If your EWF is enabled, please dis- able the EWF by using the EWF Manager command. 4. Once the EWF is disabled click on the XP driver at www.planar.com/sup- port and follow the step-by-step instructions as shown on the pop-up windows.
Page 27
3. Remove the original Touch Interface (RS-232 or USB). 4. Connect the computer to the Touch Interface (RS-232 or USB) that you would like to use. 5. Load the driver found at www.planar.com/support, and then follow the step-by-step instructions as show on monitor. PLEASE NOTE! Don’t plug in both the RS-232 and USB cables!
Support and Service Planar is a US company based in Beaverton, Oregon and Espoo, Finland with a worldwide sales distribution network. Visit Planar at http://www.planar.com/support for product registration, operations manuals, line drawings, touch screen drivers, warranty information and access to Planar’s Technical Library for online troubleshooting.
Need help?
Do you have a question about the LA1500R and is the answer not in the manual?
Questions and answers