Yamaha YXZ 1000R SS 2020 Owner's Manual page 150

TIP
Be sure to wipe off spilled oil on any parts af-
ter the engine and exhaust system have
cooled down.
16. Install and tighten the engine oil tank filler
cap.
17. Start the engine and let it idle for several
minutes. During this time, check for oil
leakage. If any oil leaks are found, stop
the engine and check for the cause.
18. Stop the engine, wait at least ten minutes,
and then check the oil level one last time.
19. Install the engine oil tank cover by install-
ing the bolts.
9
20. Install the panel.
To change the engine oil and oil filter
1. Park the vehicle on a level surface.
2. Loosen the left and right side panels by
removing the bolt as shown.
1
1. Left side panel
2. Right side panel
3. Bolt
3. Remove the rear bottom panel by remov-
ing the bolts.
9-23
3 3
2