Yamaha YXZ 1000R SS 2020 Owner's Manual page 100

 the engine is not warmed up or is overheat-
ing.
 the driver seat belt is not latched.
 the differential gear is locked ("DIFF.
LOCK" is selected) or the differential gear
lock indicator is flashing.
 the parking brake is applied.
 an engine or system malfunction is detect-
ed (a warning light is on).
To activate the launch system
1. Confirm that the front wheels and steer-
7
ing wheel are pointed straight ahead.
2. Shift the transmission into first gear.
3. While pressing the brake pedal, pull both
shift paddles toward you and hold them
in that position. The launch system indi-
cator light will come on, and the launch
system enters standby mode.
4. While checking in front of you for obsta-
cles or anything that may cross your
path, release the brake pedal, and then
press the accelerator pedal to rev the en-
gine to the desired launch engine speed.
TIP
 The engine speed at launch must be be-
tween 5000–10000 r/min.
 If you release one shift paddle, or if a sys-
tem restriction is detected during standby
mode, the launch system indicator light will
begin to flash and the launch will be can-
celled.
7-8