Table of Contents
Advertisement
SPLIT - INNER FRAME ASSEMBLY
3
Make sure to patiently adjust the inner frame corner in 90 degree and now secure the screws.
It is a critical step to square the frame. Refer to the illustration below. Measure the diagonals
4
to check if the frame is square. If one diagonal is longer, push on the corners at that diagonal.
Tighten all set screws once the diagonals are equal or within 1/8''.
8
A
A = B
Note: If LED lights were ordered, refer to page 10 for
instructions on attaching LED lights to the screen frame.
B
Advertisement
Table of Contents
