Table of Contents
Advertisement
LED LIGHTS ATTACHMENT
4
Note: Use caution in the next steps; do not kink or fold the light strip, which will cause damage
in the circuit. Use the foam strips provided to losely wrap LEDs around the corners.
Press the lights into the channel on the frame. LED foam must be used when rounding the
5
corners to protect the circuit. Failure to do so will damage the LED strips. The strip should gently
round the corner.
Scan this QR code to see the video for LED kit troubleshooting.
CUT HERE
Cut the light strips at the copper pad
where indicated to the correct length
so they just overlap at the middle of
the top frame piece. DO NOT cut the
light strips at any other location.
11
Advertisement
Table of Contents
