Table of Contents
Advertisement
SPLIT - INNER FRAME ASSEMBLY
Wear gloves first, clean up and put the Prep Paper on the floor. Make sure to remove the Vertical
1
support bar and keep it aside safely. Lay out all innerframe in order on Prep Paper to ensure you
have all the required pieces.
NOTE: Look for the SI logo to determine the bottom horizontal frame.
Slide the corner metal bracket pieces, along with the thick and thin corner brackets as shown.
2
Now slide in the flat metal plates in the corners as shown, you can use flat head screws. Next,
slide the horizontal frame pieces together and secure the splice bars, using the set screws.
Splice bars
Thin Bracket plates
Flat Metal plates
Thick Bracket plates
Prep Paper
M
m
7
Advertisement
Table of Contents
