Screen Innovations Zero Edge / Fixed Installation Instructions Manual page 14

MAESTRO 2 – AT MATERIAL (WITH BLACK BACKER) –
ATTACHMENT
Note: Wear gloves when handling the material. Carefully unroll the screen material onto a clean floor.
Take care to not bend or crease the screen material.
Unroll the Meastro 2 screen material on the Prep Paper (Refer to instructions on page 12). Flatten
1
any creases and then lay the Black Backer material well aligned over the Maestro 2 material.
Carefully lay and center the frame over the screen material and backer. Now you can use the
corner seams of the backer material to cover the corners of the frame. Pull the material to make
sure its spread well under the frame.
3
Black
Backer
Material
Maestro 2
2
material
Remove and discard the retaining bumpers, then spread out the posts so they align with
2
the holes in the screen material.
14
Assembled frame
4
Prep paper
1