Table of Contents
Advertisement
STANDARD - INNER FRAME ASSEMBLY
Wear gloves first, clean up and put the PEP foam on the floor. Lay out all innerframe in order on
1
PEP foam to ensure you have all the required pieces.
NOTE: Look for the SI logo or a hole for the LED kit lighting (if ordered), that should be the bottom
horizontal frame.
Insert the thin corner brackets into the outside channels, the thick corner bracketsinto the
2
inside channels of the vertical frames. Then slide into the channels in the horizontal frames.
Thick
Bracket
Thin Bracket
Prep Paper
5
Advertisement
Table of Contents
