Pvc At Material Attachment - Screen Innovations Zero Edge / Fixed Installation Instructions Manual

MAESTRO 2 – AT MATERIAL (WITH BLACK BACKER) –
ATTACHMENT
Make sure the screen material is centered around the frame before proceeding. If its not
3
centred it could pull on one side damaging the material.
Pull the holes in the material and place around the post. Repeat for all four corners and refer to
the attachment sequence image on page 12.

PVC AT MATERIAL ATTACHMENT

(Slate AT, Pure AT)
Ensure the screen material is flat and adjust the snap positions if necessary to flatten the screen
material. Once all snaps are attached (following the sequence above), flip screen over and make sure
that the screen material is flat and taut everywhere.
Scan the QR code to the PVC snap
attachment video.
15