Page 1
CB1 Series Models: ENTM02, ENTM03, ENTM04, ENTM05 Admin Guide Installation | Configuration | Support | Maintenance | Use 800.205.7186 • www.codeblue.com...
Page 2
OF OR IN CONNECTIONS WITH THIS GUIDE, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Code Blue Corporation reserves the right to make any modifications to this guide or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate user license agreement.
DC 10 Amps Max Multi-Tap Transformer (Power Brick) 110-347VAC Locating Unit Serial Numbers Maintenance Schedule Warranty Download Information Legal and Regulatory Information • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 3 of 31 Code Blue GU-157-FF...
CB 1 Series for your Code Blue application. CB 1 Series of products are the original Code Blue pedestal units that set the industry standard for rugged construction, full feature availability and high visibility. The CB 1 Series easily recognized throughout a full 360-degree area. The user friendly lighted faceplate and the integral area light ensure rapid location in an open environment.
CB 1 Series options and its application, installation and wiring CB 1-e CB 1-s CB 1-s with Dual Faceplate • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 5 of 31 Code Blue GU-157-FF...
In some countries, a certified electrician may be required. NOTICE When transporting a Code Blue product, use the original packaging or equivalent to prevent damage to the product. Code Blue products shall be used in compliance with local laws and regulations.
• 1-1/8” Socket set & extension • Phillips and flat head screwdrivers CB1 Units w/ NightCharge® Require: • ½” wrench for NightCharge® batteries. • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 7 of 31 Code Blue GU-157-FF...
Important Notes: EIA/TIA, ANSI, CSA and BICSI cabling or similar standards shall be adhered to for proper operation of Code Blue communication devices connected to copper or fiber infrastructures communications cable and electrical cable in the same conduit is not an acceptable installation and shall not be supported.
1.3 Set the Anchor Bolts in the Wet Foundation Four 24-inch L-shaped anchor bolts and an aligning template are supplied for anchoring the Code Blue unit. The bolts should be set into the foundation so that six inches are left showing above the finished grade level.
NOTE: Communications wire must be shielded phone line. The phone line must be pulled into the unit using a separate conduit from the power. Along with a service loop of wire, as noted by the NEC standards. • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 10 of 31 Code Blue GU-157-FF...
IMPORTANT: Leveling the bottom nuts is crucial to leveling The bottom edge of the Code Blue unit will be 1/2" above the unit. A small error will be magnified the concrete when in stalled.
10-24 X 1-inch stainless steel thumbscrews against the inner wall. 4.4 Finally, reattach the clear Lexan dome to the black metal cast- ing with the security screws provided. Code Blue • 259 Hedcor Street •...
Equipment Ring Accessory SKIP if installation does not include an Equipment Ring accessory. Code Blue has blank Mounting Rings as optional features for its 1 Series Pedestal Help Points®. De- signed in three varieties, these rings allow a customer to internally and externally mount third party communication and security equipment to their unit to enhance connectivity and functionality.
10-24 x 1-inch stainless steel thumbscrews against the inner wall. • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 14 of 31 Code Blue GU-157-FF...
(a) dawn/dusk transition delay of 15-30 minutes and (b) transient light acknowledgement delay of at least 3 minutes. • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 15 of 31 Code Blue GU-157-FF...
0.22 A rms Max 0.22 A rms NOTE: Average current draw in Flash Mode will vary by selected Flash mode. The above maximum amperage draw is stated at Single 60 FPM. Code Blue • 259 Hedcor Street • Holland, MI 49423 USA •...
CB 1 Series Administrator Guide 6 Power Requirements The following tables on pages 17-20 include and ALL OTHER Code Blue devices & enclosures for reference. • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 17 of 31...
Page 18
CB 1 Series Administrator Guide • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 18 of 31 Code Blue GU-157-FF...
Page 19
CB 1 Series Administrator Guide • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 19 of 31 Code Blue GU-157-FF...
Page 20
CB 1 Series Administrator Guide • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 20 of 31 Code Blue GU-157-FF...
CB 1 Series Administrator Guide 7 Wiring Diagrams 100-240 AC / DC or 24V AC @ 60 Watt or 24V DC Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 21 of 31...
CB 1 Series Administrator Guide PoE DIN Rail Power System | 48V DC 12.96w or 25.5w • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 22 of 31 Code Blue GU-157-FF...
CB 1 Series Administrator Guide NightCharge® 120-240V AC @ 5 Amps w/ Area Light | 12VDC 10 Amps Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 23 of 31 GU-157-FF...
CB 1 Series Administrator Guide NightCharge® 120-240V AC @ 3 Amps NO Area Light | 12VDC 10 Amps Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 24 of 31 GU-157-FF...
CB 1 Series Administrator Guide 120-277V AC DIN Rail Power w/ 150W Audio Paging | 12 or 24V DC 10 Amps Max Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 25 of 31...
Reference the model and serial number from the unit ID tag and contact the manufacturer to confirm replacement part version and availability. The information contained herein is subject to change without notice. Code Blue •...
Remove the access door with the special security bit. The serial number will be listed on the manufacturer’s label located on the backside of the access door. Serial Number Location • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com page 27 of 32 Code Blue GU-157-FF...
ANNUALLY Replace batteries used with NightCharge®, cellular or RF systems (Replace with batteries recommended by the communication manufacturer to ensure optimal performance) Code Blue • 259 Hedcor Street •...
Page 29
The Surface Care Frequency table below provides general guidelines to assist in configuring a schedule. Please note that the frequency of care required to guard the Code Blue unit’s surface from damage will also be dictated by local environmental characteristics.
10 Warranty Code Blue Corporation provides a limited warranty on this product. Refer to your sales agreement to establish the terms. In addition, Code Blue’s standard warranty language, as well as information regarding support for this product while under warranty, is available at www.codeblue.com/support...
CB 1 Series Administrator Guide 11 Download Information Code Blue now has a centralized location where you can find installation, setup, information, configuration and operation instructions. Admin Guides: www.codeblue.com/resources/guides Frimware: www.codeblue.com/resources/firmware Maintenance Tips: www.codeblue.com/support Product Sheets: www.codeblue.com/resources/sheets Specifications: www.codeblue.com/resources/specifications For Legacy Product Information: www.codeblue.com/legacy-products...
This digital apparatus complies with CAN ICES-3 (Class A). The product shall and fitness for a particular purpose. Code Blue shall not be liable or be connected using a shielded network cable (STP) that is properly responsible for incidental or consequential damages in connection with grounded.
Need help?
Do you have a question about the CB1 Series and is the answer not in the manual?
Questions and answers